The Pros and Cons of Using Dimension Bot v1.3 Cracked for YouTube Growth
This setup requires the installation of the Precision Fixturing and Toe Clamp Setonto the machine. These instructionsexplain the installation procedure. However, the left side of the Precision Fixture needs to be shortened, for thealuminum milling operations not to collide with the fixturing. The inside dimension (ID) of the left side of thePrecision Fixturing needs to be 88mm. It can easily be shortened using a hacksaw. The images below show theshortened Precision Fixturing installed on the machine.
Dimension Bot v1.3 Cracked
Begin by viewing the edge descriptions image for the part being manufactured and write the number of each listed edgedirectly on the blank piece of aluminum. The width and height dimensions of the blank are assumed to be the same.Therefore, the orientation of the blanks does not matter. The left and right images show the opposite sides of the samepiece of aluminum. The images share the common edge between them, with the piece of aluminum being flipped over liketurning the page of a book. For example, the Top Face edge descriptions imageillustrates that edge #6 (on side A) and edge #2 (on side B) are the same edges. As the respective milling operationsare performed, the written edge numbers will be removed. It is important to keep track of which edge is which throughoutthe milling operations. It is recommended to either rewrite the edge numbers back onto the aluminum after the millingoperation is complete or use pieces of tape with the edge numbers written on them. The tape must be removed before amilling operation is started and replaced after the operation is complete.
The most efficient approach to milling the aluminum parts is to configure the Bantam Tools Machine using the 1st setupand execute milling operations 1-4 for the respective Face parts and Bracket Blanks, as listed below (totaling eightseparate pieces). The milling operations 1-4 will cut the aluminum pieces into the correct X and Y dimensions. Next,configure the Bantam Tools Machine using the 2nd setup and execute milling operations 5-6 on the previous eight respectivealuminum pieces. Milling operations 5-6 will plane the aluminum pieces into the correct Z dimensions (i.e.,thicknesses). Then, reset the Bantam Tools machine using the 1st setup and execute the remaining milling operations forthe six respective Face parts. Lastly, configure the Bantam Tools Machine using the 3rd setup and complete the millingoperations for all the Bracket parts, as listed below. An additional benefit to this approach is that aftercompletion of the aluminum parts milling, the Bantam Tools Machine will already be configured into the 3rd setup andtherefore, ready to begin with the PCB milling steps.
Begin by attaching the two ribbon cables and the two ethernet cables (one short and one long) into their respectiveconnections on the Front Face Assembly. On the Bottom Face Assembly, attach the two MMCX to SMA coaxial cables to theAPX-18 board and attach the remaining (long) ethernet cable to the ethernet jack on the OpenMMS APX-18 Board v1.3.Remove the star washer and locking nut from the ends of the coaxial cables. Install the Bottom Face Assembly on theFront Face Assembly using three M3 12mm long button-head bolts.
It is recommended that the GNSS antenna arms be inserted 5mm past the end of the 2nd aluminum bracket on eachside. Over-inserting the GNSS antenna arms help prevent the open end of the square carbon fiber tubes from beingcracked or damaged when the aluminum brackets are tightened. For repeatable installations of the GNSS antennaarms, reference marks should be made on each arm.
If your servo clicks here it means it's jumping teeth and might need rebuilding, worse case a gear has cracked, but the servos are cheap so just replace it. All of our servos in the #meArm kits are tested so none will click out of the box.
Although some have theorized that the prevalence of Cybertron across the dimensions means that it acts as a kind of "stable axis" upon which the entire multiverse spins, many individual Cybertrons and their inhabitants might never know that they exist on a larger continuum; on a cosmic scale, travel between individual universes is comparatively rare, and often accidental. However, there exist certain groups and individuals dedicated to monitoring, moving between, and/or protecting the many worlds of the multiverse, including Vector Prime, the Alternity and their successors the Flaternity, the TransTechs, and the Spacetime Police of Cloud World. There are also others who are a threat to the multiverse including Unicron, The Fallen, the Megatron Aggregate, the Elder Gods, the Quintessons, and Megatron of the Cloud World.
From 2009 to 2010, the Allspark Almanac expanded the Transtech notation to, among other things, include a proper universal cluster for GoBots, another for the TransTech themselves, and even one for the "real world". For the next eight years, the multiverse would define Fun Publications' time on the brand; stories would frequently involve characters crossing into different realities or embarking upon epic cross-dimensional quests.
That same year, Fun Publication's "Ask Vector Prime" feature offered the most definitive look at the multiverse yet: in addition to fleshing out obscure realities, delving into the history of the TransTech and the multiverse itself, tying together bits of TransTech, Cloud, and Alternity lore, and exploring the lives of other pan-dimensional beings like the Hytherion, the column took a stab at laying out a definitive multiversal cosmology by establishing both the Megaverse and the wider Omniverse, and providing in-fiction explanations for things like animation errors and fictional crossovers. Ultimately, however, with their time on the brand winding down, Fun Publications introduced the "Shroud" in late 2015: after years of increasingly contentious debate about their position in the multiverse meta-lore, the Shroud provided an in-fiction means of retroactively nullifying the concept of multiversal singularities entirely while also "strengthening the dimensional boundaries" and rendering further dimensional travel much harder.
The Transformers multiverse is vast, but just how vast is not entirely clear. As a subset of the endless Omniverse, the multiverse encompasses an extremely large number of potential realities: according to Vector Prime, this number lies somewhere in the millions, the Transcendent Technomorphs of Axiom Nexus claim to have discovered at least 15,962,782 different universes, the Autobots of one universe analyzed 75,890,007 realities while searching for their Optimus Prime, Bug Bite once put the number at a whopping fifteen quadrillion, and other stories have described the multiverse as infinite. Regardless of how many potential realities might exist, there exist a finite number of beings with the technological sophistication and drive to explore and chart them, and as a result groups of Transformers and Transformer-analogues across the dimensions have come up with different ways to chart and classify these parallel realities.
The higher dimensional Alternity use the universal stream system in conjunction with the simpler names. Residents of the Cloud World may appear to use this system, but their usage of "World" is very different (see below).
In Transformers Cloud, the multiversal regulators of Cloud World organize the multiverse, which they call the "Spacetime World", under a system of "Spacetimes" (時空 Jikū). Each spacetime falls under a two-letter code designating its general dimensional category, such as "OG" or "MD", representing real world franchises rather than continuity. These categories can also be referred to as "Worlds" (世界 Sekai) or unnumbered spacetimes. Individual timelines are then numbered via two digit time coordinates. As such, you get designations like "24-BW Spacetime" (第24BW時空 Dai-Nijūyon Bīdaburyū Jikū). This does not indicate strict separation, as many spacetimes are connected in greater "flows of time" (時の流れ toki no nagare), representing continuities, that can cross different world categorizations; the numerical designations indicate branches in this flow.
During their reign over Cybertron, the Quintessons used a specialized portal chamber to exile prisoners to alternate dimensions, including an ice world, a place with no physical substance, and the magical land of Menonia. Madman's Paradise
The meddling of the time traveler Ravage to tip history in favor of the Decepticons irrevocably altered the timeline of the G1 World from 2005 onwards, eventually producing a splinter universe known as the BT World. Changing Lanes This BT World would lead to the creation of the truly multidimensional Alternity, who protected the universes against threats like the Hytherion From Here to Alternity and those who sought to control the beast. To Mega Therion The Alternity's battles spanned multiple universes till a plot by Megatron forced the Alternity to be replaced by the Planicrons. Alternation
The Binaltechs and Protectors traveled to G1 World to attend the trial of Primacron by the Quintessons in 2011. Upon the conclusion of proceedings, Primacron departed the G1 World for dimensions unknown. Controverse In the same year, the Autobots traveled to a parallel dimension to assist the inhabitants of Sandra, a parallel version of Earth. SOS from Planet Sandra
At some point, Skids bathed in Dimension Slide particles, giving him new abilities that allowed him to transverse the multiverse. He, with another version of himself called Screech, leapt to another universe to deal with an errant ghost of Starscream from Skids's own universe. Starscream's New Body Becoming a "Dimensional Investigator", Skids policed the dimensions with his Skids Squadron, made up of Skidses from across dimensions. Bonus Edition Vol. 20
In 2021, Unicron summoned Thrust and Breakdown from their native dimensions to aid in the resurrection of his G1 World incarnation, reformatting them into fodder for Grand Galvatron. Grand Galvatron Chapter Unicron later summoned Grand Scourge to the G1 World in an attempt to bamboozle Ruination into fighting alongside his warriors. Ruination Chapter, Part One Unicron's tampering with the timeline and universe threatened to destabilize the multiversal barriers, so everybody banded together to stop Unicron's plans, but not before Grand Scourge and Galvatron II were tossed to locations unknown through a crack in spacetime. Ruination Chapter, Part Two Around this time, many beings went back and forth to the Legends World for various reasons.